EVLZR4
Probationary Member
- 3
- 0
- Apr 21, 2014
-
Auckland,
Hawaii
Welcome guys. I am starting this thread as I finish off my ZR4 and look at building a 4G64 engine. This is going to be a slow and expensive build so please bare with me. All help is appreciated and I look forward to the outcome.
First off is the grounds of the build and it is going to be in a VR4-EvoIII shell however that is still to be decided.
I am looking for help on finding what block to use for the beginning of the build and where to salvage one from. Any help on this ground is what I need to begin. I will also be looking into the compression off different heads available to use with these blocks.
First off is the grounds of the build and it is going to be in a VR4-EvoIII shell however that is still to be decided.
I am looking for help on finding what block to use for the beginning of the build and where to salvage one from. Any help on this ground is what I need to begin. I will also be looking into the compression off different heads available to use with these blocks.