Installing new LICP's, what to do with wastegate vac line

[flyinghighlm]

I bought some hard LICP, It came with the larger elbow as well that comes off the turbo. Question is, the stocker has a hose that comes off it and runs down to the the wastegate, BUT the new one has no such nipple to plug that hose back into. Am I missing something, what do I do with the hose then that runs off the waste gate???

 

[tbTalonES94]

either Tee it into your BOV line, or drill/tap your new i/c pipe and install a vacuum nipple in it. The right way would be to drill/tap and install the nipple, but people tee into their BOV line constantly and it seams to work.

 

[romeen]

http://www.dsmtuners.com/forums/showthread.php?t=255444

 

[flyinghighlm]

http://www.dsmtuners.com/forums/showthread.php?t=255444

Freakin great, thanks for the link, I tried searching but it help to use the right terms...Thanks again

 

[Dream On]

Just did the same thing with my car today. Wasn't that bad after all.

 

[daren_p]

Like the above posted link says, drill & tapp the pipe to install a barbed fitting. Ting into the BOV can be a temp fix but isn't recommend. You can run into issues with the BOV not operating correctly & also have issues with poor boost control.