ev0316g install questions

[blitzed97]

hey,
ill be putting on a new evo316g on my 98 gsx. i have a new ported evo3 manifold, and a tubular o2 that im replacing at the same time. i will be using oil and water lines from a 1g eclipse. what i want to know is will i be able to hook up all the oil and water lines to the turbo and the put it in and just hook u the opposite sides of the lines to the engine. or will i have to install the turbo without the lines attached then hook up the lines? also would i be able to install the turbo and o2 together easily. i know doing these things are possible just not sure how much space i have to get to this stuff in the engine bay because it looks kind of tight. any help would be great i have searched and read lots of posts but havent really read anything about being able to hook the lines to the turbo first then install.

 

[blcknspo0ln]

update your profile, you're still nonturbo.

anyway, put everything together. hook up the water lines to the turbo and then "test" fit the position of the water lines. bend them to working location. then hook up the oil return line [ of course the side that goes to the turbo ] after that hook up your o2 housing.

put your manifold on first.. then attach the entire turbo assembly to the manifold. it's the easiest that way. then hook up your downpipe, oil return, water lines, etc.

 

[people337]

I am currently swapping with a 14b so its the same basic setup this, was helpful for me.

http://www.vfaq.com/mods/2G-16G.html