Need some help with AFC settings

['98 AWD DSM]

I just put in a 57 Trim turbo and I need some help tuning it. Should I aim to keep the EGT at around 800c-850c? In addition what are some good settings I can use to get it all going. I have 550cc Injectors, a walbro 255 pump, and a S-AFC II. Should I start it out lean across the board and tune it to richen up or what? I can really use some help thanks a lot

 

[btrux06]

first off you really NEED a datalogger to monitor whats going on, get that, start on the richer side with low boost and either lean out or boost up more from there. thats a damn big turbo to have with no datalogger and little to no experience tuning a dsm via safc, sorry no affence, also those 550s will not get u far at all, your going to need and want 680 or 720s, start out with only 10 lbs of boost, with that big of a turbo 10 lbs will be real fast and may even already max out the 550s. basically u wont be able to do much as far as tuning untill u get the datalogger, good luck, questions welcome