hooking up an s-afc need to know 2 wires

[sethtroy]

any help would be appreciated i have downloaded many directions for 2g dsm s-afc installs and they are useing 2 diffrent sets of wires for the air fuel wire i cut the blue with yellow on the ecu but dont know what 2 colors to wire to the ends. also should i have 2 extra wires from the s-afc when i am done? thank you for any help. it is a 99 gst

 

[kpt4321]

Nice run-on sentence.

http://www.ecanfix.com/~aclifford/tree/images/index/mods/superafc/afc.jpg

The VFAQ OWNZ JOO.


....Kyle T.

 

[sethtroy]

ok thank you for the diagram, but is there supposed to be 2 extra wires left over i ended up with 2 extra wires.

 

[ItsStockOfficer]

those are for handuhz

 

[kpt4321]

They are not for hondas, but you are suppsed to have 2 extra wires.


....Kyle T.

 

[ItsStockOfficer]

They ARE for Honda's in addition to other cars

 

[kpt4321]

<sigh>

One of those wires is a secondary MAS input, for cars such as the Skyline that have 2 mass air sensors.

That wire is most definately NOT used on a Honda. At least, every Honda I have seen only has one input to the SAFC. Maybe in your area they come equipped with the RB26DETT and AWD, and maybe ATESSA or Super-HICAS.

Do some research before you post information:

http://www.apexi-usa.com/productdocumentation/electronics_safc_ins.pdf


....Kyle T.
93 TSi AWD "TURBO4"

 

[ItsStockOfficer]

You raise an interesting point...

You referring to the blue wire, I'm refering to the pink and orange being used for karman based sensors where as you use a white and yellow for voltage based sensors.

He should have a white, a yellow, AND a blue left over.

And don't try to treat me like an idiot. ####ing 14B racers.

Sean
11.9@119

 

[Bd1000Eclipse]

Originally posted by kpt4321
<sigh>

for cars such as the Skyline that have 2 mass air sensors.

that would be so cool....