adjusting the AFPR

[droptopgst]

what should this be set at? I have it at about 3 with the greddy afpr gauge. should i have higher psi for more boost? my boost is set around 19. here are my mods

PERFORMANCE MODS
TDO5 18G TURBO (ported and clipped)
34 mm WASTE GATE
APR Front mount
255 FP
AFPR
AFC
660 INJECTORS
ATR 3" TURBO BACK EXHAUST
HIGH FLOW CAT
BOOST CONTROLLER
INTAKE
GREDDY ICP
TYPE S BOV
NGK PLUGS 1 colder

 

[kpt4321]

I assume you have it set at 3 BAR? You can't just tell us it's at 3, because 3 could be 3 psi, 3 BAR, 3 n/m^2, etc.

If you're reading it in BAR, you should set it to about 2.9, 3 is close enough.


....Kyle T.
93 TSi AWD "TURBO4"
14b - 12.8 @ 108

 

[droptopgst]

yeah sorry its bar

any advice?

 

[kpt4321]

Originally posted by droptopgst
yeah sorry its bar

any advice?

Originally posted by KPT4321
If you're reading it in BAR, you should set it to about 2.9, 3 is close enough.

C'mon dude, read the whole thing.

One thing to consider is, if you're running out of fuel you can increase base pressure.

Also, if you desire more timing advance at WOT, then you can increase base pressure and then lean out the SAFC, for more advance.

But for now, set it at 2.9 or 3, like I said.

....Kyle T.