My First Log!!

[nhsean69]

Can i get some input......i HAVE NO CLUE Car is a 1995 Eclipse GST Automatic. Type-S, Injen Intake, MSD 8.5mm, Blitz SSBC @ 15PSI on Autometer Boost/Vac gauge. I just would like to know if anything is wrong, and basically what i need to pay attention to in these logs so i dont have to keep bugging you guys!! Thanks




Time,RPM,Knock,Timing,TPS
0:00.07,906, 0, 8,11
0:00.14,906, 0, 8,11
0:00.23,906, 0, 8,11
0:00.33,906, 0, 8,11
0:00.41,906, 0, 8,41
0:00.48,906, 0, 12,79
0:00.55,1062, 0, 14,96
0:00.63,1438, 0, 20,100
0:00.71,2000, 0, 23,100
0:00.80,2531, 1, 27,100
0:00.88,3094, 1, 28,100
0:00.99,3469, 1, 28,100
4:16.08,3594, 0, 27,100
4:16.17,3531, 0, 26,100
4:16.26,3500, 0, 26,100
4:16.35,3500, 0, 25,100
4:16.45,3281, 0, 25,100
4:16.53,3156, 0, 24,100
4:16.62,2938, 0, 21,95
4:16.71,2750, 0, 20,69
4:16.79,2562, 0, 19,52
4:16.87,2469, 0, 20,50
4:16.96,2406, 0, 20,53
8:32.05,2688, 0, 21,54
8:32.14,2938, 0, 22,55
8:32.23,2969, 0, 22,61
8:32.32,3125, 0, 22,69
8:32.42,3438, 0, 22,78
8:32.51,3594, 0, 22,79
8:32.61,3844, 0, 22,79
8:32.70,4094, 0, 21,85
8:32.81,4250, 1, 20,93
8:32.92,4406, 0, 19,100
12:48.02,4656, 0, 19,100
12:48.12,4812, 0, 18,100
12:48.23,5094, 0, 20,100
12:48.33,5438, 0, 21,100
12:48.45,5719, 14, 17,100
12:48.56,6156, 13, 16,100
12:48.67,6344, 13, 15,100
12:48.78,6594, 20, 11,100
12:48.88,6750, 20, 10,100
12:48.97,7062, 20, 10,64
17:04.07,7094, 19, 18,10
17:04.18,6844, 15, 40,10
17:04.26,6719, 7, 43,10
17:04.36,6500, 0, 45,10
17:04.46,6281, 0, 45,10
17:04.56,5969, 0, 45,10
17:04.65,5781, 0, 45,10
17:04.74,5469, 0, 45,10
17:04.84,5219, 0, 45,12
17:04.94,5000, 0, 45,55
21:20.04,5031, 0, 29,99
21:20.13,4844, 0, 28,100
21:20.22,4188, 0, 25,100
21:20.32,4031, 0, 25,100
21:20.42,4312, 0, 23,100
21:20.52,4125, 0, 22,100
21:20.62,4375, 0, 21,100
21:20.72,4469, 0, 20,100
21:20.82,4500, 0, 19,100
21:20.93,4656, 0, 19,100
25:36.02,4688, 0, 19,100
25:36.13,4844, 7, 15,100
25:36.24,4844, 6, 16,100
25:36.36,5156, 14, 13,100
25:36.47,5219, 14, 15,100
25:36.58,5250, 14, 16,100
25:36.68,5281, 20, 14,100
25:36.75,5625, 20, 14,100
25:36.84,5469, 19, 14,100
25:36.94,5625, 19, 14,100
29:52.03,5688, 19, 15,100
29:52.14,5812, 19, 15,100
29:52.24,6062, 19, 15,100
29:52.35,6156, 19, 14,100
29:52.47,6062, 18, 14,100
29:52.60,6344, 18, 12,100
29:52.71,6344, 18, 14,100
29:52.79,6406, 18, 14,100
29:52.90,6469, 18, 12,100
34:08.01,6562, 17, 13,100
34:08.11,6719, 17, 14,97
34:08.21,6688, 17, 13,95
34:08.31,6781, 21, 11,50
34:08.40,6812, 21, 18,10
34:08.50,6594, 16, 40,10
34:08.60,6531, 6, 43,10
34:08.70,6125, 0, 45,10
34:08.80,5875, 0, 45,10
34:08.90,5750, 0, 45,10
38:24.00,5625, 0, 45,29
38:24.09,5125, 0, 34,70
38:24.19,4656, 0, 28,100
38:24.30,4562, 0, 27,100
38:24.40,4594, 0, 25,100
38:24.50,4531, 0, 22,100
38:24.61,4625, 0, 21,100
38:24.70,4625, 0, 20,100
38:24.82,4781, 0, 19,100
38:24.93,4812, 0, 19,100
42:40.03,4875, 7, 15,100
42:40.14,4875, 12, 14,100
42:40.24,4812, 17, 12,100
42:40.35,5031, 16, 12,100
42:40.44,5062, 16, 12,100
42:40.54,4969, 16, 12,100
42:40.64,5062, 16, 13,100
42:40.75,5219, 16, 13,100
42:40.84,5062, 16, 14,100
42:40.95,5125, 15, 15,100
46:56.07,5312, 18, 14,100
46:56.16,5344, 18, 14,100
46:56.26,5406, 18, 14,100
46:56.36,5500, 18, 15,100
46:56.48,5375, 23, 12,100
46:56.56,5469, 22, 13,100
46:56.66,5625, 22, 13,100
46:56.75,5594, 22, 13,100
46:56.84,5625, 22, 13,100
46:56.92,5812, 22, 13,100
51:12.02,5594, 22, 14,100
51:12.12,5656, 21, 14,100
51:12.21,5781, 21, 14,100
51:12.31,5812, 21, 14,100
51:12.43,5938, 28, 12,100
51:12.52,5812, 28, 12,100
51:12.63,5844, 28, 12,100
51:12.73,6031, 27, 12,100
51:12.82,5938, 27, 12,100
51:12.92,5875, 27, 12,100
55:28.05,6000, 27, 12,100
55:28.15,6094, 27, 12,83
55:28.26,6188, 27, 13,10
55:28.36,5719, 25, 36,10
55:28.46,6188, 16, 40,10
55:28.55,6062, 6, 43,10
55:28.65,6062, 0, 45,10
55:28.75,5938, 0, 45,10
55:28.84,5875, 0, 45,10
55:28.94,5781, 0, 45,10
59:44.04,5531, 0, 45,10
59:44.13,5500, 0, 45,10
59:44.22,5344, 0, 45,10
59:44.32,5281, 0, 45,10
59:44.40,5250, 0, 45,10
59:44.49,5219, 0, 32,10
59:44.57,5031, 0, 32,10
59:44.66,4844, 0, 32,10
59:44.74,4906, 0, 32,10
59:44.83,4750, 0, 32,10
59:44.92,4594, 0, 31,10
64:00.01,4531, 0, 30,10
64:00.09,4406, 0, 30,10
64:00.17,4312, 0, 30,10
64:00.25,4219, 0, 29,10
64:00.34,4125, 0, 29,10
64:00.42,3938, 0, 28,10
64:00.50,4000, 0, 28,10
64:00.58,3844, 0, 28,10
64:00.66,3719, 0, 28,10
64:00.74,3656, 0, 27,10
64:00.82,3562, 0, 27,10
64:00.90,3469, 0, 27,10
64:00.98,3406, 0, 27,10
68:16.06,3312, 0, 27,10
68:16.14,3250, 0, 26,10
68:16.21,3219, 0, 26,10
68:16.29,3094, 0, 26,10
68:16.37,3000, 0, 26,10
68:16.44,2938, 0, 26,10
68:16.52,2844, 0, 26,10
68:16.60,2781, 0, 26,10
68:16.68,2719, 0, 25,10
68:16.76,2719, 0, 25,10
68:16.83,2688, 0, 25,10
68:16.92,2688, 0, 25,10
68:16.99,2688, 0, 25,10
72:32.07,2688, 0, 25,10
72:32.14,2625, 0, 25,10
72:32.22,2656, 0, 25,10
72:32.29,2625, 0, 25,10
72:32.37,2625, 0, 25,10
72:32.45,2625, 0, 26,11
72:32.53,2625, 0, 38,12
72:32.61,2625, 0, 38,13
72:32.68,2562, 0, 38,15
72:32.77,2594, 0, 38,16
72:32.85,2656, 0, 38,16
72:32.93,2562, 0, 38,16

 

[kpt4321]

Um, I'm confused. Do you have DSMLink?

I'm located in New Hampshire too. Drop me a PM if you would like me to give you a hand with the tuning.


....Kyle T.
93 Tsi AWD "TURBO4"
14b - 12.8 @ 108

 

[nhsean69]

Oops, i thought i posted that.......Im using a Pocketlogger OBDII version 1.02 with a Palm V PDA. Im located in Nashua, NH.......Thanks, ill keep that in mind. After i get my S-AFC installed i might take you up on that.

 

[echo]

that knock is pretty high. need to lower boost or get some more fuel.

 

[Mike 99GSX]

Originally posted by nhsean69
Oops, i thought i posted that.......Im using a Pocketlogger DSMII version 2.0 with a Palm V PDA. Im located in Nashua, NH.......Thanks, ill keep that in mind. After i get my S-AFC installed i might take you up on that.

How are using the DSM pocketlogger with a 2g and not the OBDII?

 

[Omega]

I'm with Mike... What ECU are you using?

 

[P8ntBalla]

knock


WTF?

 

[nhsean69]

It was a rough night last night , its the OBDII version. So i should lower my boost to like 12-13. Im ordering a Walbro 255 and a rewire kit today. Anything else i need to do?

 

[FastRthenU]

I thought 2g's cant read knock because of the OB2

 

[crashed97tsi]

Originally posted by FastRthenU
I thought 2g's cant read knock because of the OB2

They can't. I have the obd2 version and mine doesn't read knock. Other than that, I'd say your car needs some fuel mods. Right around 4800 or so you seem to knock and get your timing pulled. I am by no means a pro at this tho.

Ok, now for the mystery. How are you reading knock on a 2g?

 

[nhsean69]

I have no clue..........Like i said, all i am using is the OBDII Pocketlogger Version 1.02 from the digitaltuners site. Palm V plugged into the OBDII port in my car. I took the log converted it to what i posted and Bam!! Thats what it says Im as confused as everyone else!!!

 

[nine5raptor]

I thought the current version was 1.02h for the obd2 pocketlogger software. what do you really have?

edit:\\v2.0 came out 3/11/03 for the dsms v2.03 came out 4/28/03 for the dsms. we obd2 guys are still 1.02something like I said.

if you have 2.0 and it reads knock, you are trying to use obd1 software on an obd2 vehicle.

 

[P8ntBalla]

i dont think there is an obd2 version 2, i think you downloaded the dsm version.

 

[crashed97tsi]

ok here's the other thing. Are those readings accurate. I can't see how since his timing advances at one point with 14 counts of knock. I'd contact pocketlogger and get the correct version for your car

 

[P8ntBalla]

its not accurate because the 2g cars CAN NOT log knock without a dsm link. yes it sucks but thats the truth. it must be picking up some other reading or something.

 

[nhsean69]

Hmmm.....your right, they have 2.0 plastered all over the site, so i think that was stuck in my head, i checked the version and it says on my PDA PocketLOGGER™ V1.02h for OBDII


OK i editted all my posts so future readers and posters are not all F'd up. So far ive gathered i need to turn the boost down till i do some fuel mods!! Anything else?/

 

[nine5raptor]

v1.02h cannont read knock. that is what I have.

 

[nhsean69]

I know it cant read knock, i think its something that the conversion software from DigitalTuning needs a knock count, so its trys to translate one anyways. Im not holding the knock count as anything reliable. Just the timing and other stuff.

 

[kpt4321]

Currently, I don't want to take any of the information you posted worht a damn. If the conversion program is making up knock counts, then who's to say that it's not ####ing up the other numbers?

What you need to do is this: Clear the logger, and go out and make a pull. Log TPS, O2, Timing, RPM, and anything else you think is really important. Do a good hard pull all the way through second and/or third gear.

With those numbers, we'll be able to help you a lot more.

I just would rather not make assumptions and guesses if I'm not even sure the information is correct, things could go very wrong very quick.

....Kyle T.
93 TSi AWD "TURBO4"
14b - 12.8 @ 108

 

[nhsean69]

Sweet.....I will do that, Ill try to post the Actualy graph instead of the conversion, maybe that will help. Other then that is there any Magic number or range i dont want my timing to be pulled into, Like a Dangerous zone for timing pull??

 

[nhsean69]

Time RPM SPEED TIMING AIRFLOW TPS

0.71 772.0 0.0 5.0 0.42 0.39
1.41 764.0 0.0 8.0 0.42 0.39
2.24 776.0 0.0 5.0 0.42 0.39
2.96 780.0 0.0 7.0 0.42 0.39
3.65 768.0 0.0 8.0 0.41 0.39
4.38 784.0 0.0 8.0 0.43 0.39
5.21 708.0 0.0 8.0 0.44 0.39
5.93 784.0 0.0 10.0 0.54 0.39
6.62 1836.0 0.0 9.0 2.58 18.47
7.35 1940.0 1.0 21.0 3.1 23.58
8.16 2440.0 3.0 16.0 4.58 56.58
8.87 3008.0 7.0 8.0 8.41 55.8
9.56 3808.0 11.0 4.0 13.49 46.76
10.28 3448.0 16.0 27.0 1.64 0.79
11.11 2208.0 21.0 34.0 0.75 0.39
11.84 1436.0 23.0 26.0 0.57 0.39
12.53 876.0 22.0 14.0 0.4 0.39
13.26 804.0 19.0 14.0 0.47 0.39
14.07 724.0 16.0 11.0 0.44 0.39
14.78 764.0 13.0 11.0 0.53 0.39
15.5 1808.0 9.0 10.0 1.98 28.29
16.23 2220.0 7.0 15.0 4.16 34.18
17.06 2576.0 6.0 14.0 5.71 33.79
17.78 3132.0 7.0 9.0 8.6 34.58
18.49 4016.0 11.0 9.0 14.05 45.19
19.22 2760.0 14.0 13.0 5.75 0.79
20.06 2560.0 24.0 32.0 2.42 14.54
20.77 2260.0 27.0 22.0 4.09 19.25
21.48 1620.0 27.0 28.0 0.92 0.39
22.21 980.0 29.0 19.0 0.5 0.39
23.05 992.0 29.0 13.0 0.49 0.39
23.75 876.0 27.0 14.0 0.46 0.39
24.47 796.0 24.0 11.0 0.46 0.39
25.2 736.0 20.0 13.0 0.46 0.39
26.04 724.0 17.0 9.0 0.47 0.39
26.75 724.0 14.0 10.0 0.47 0.39
27.47 740.0 9.0 13.0 0.51 0.39
28.2 1400.0 6.0 11.0 0.55 19.25
29.04 2156.0 3.0 17.0 3.63 29.86
29.75 2456.0 4.0 16.0 5.13 31.43
30.47 2876.0 6.0 13.0 6.88 32.61
31.18 3816.0 9.0 9.0 12.26 46.76
32.0 3352.0 17.0 9.0 15.52 61.69
32.71 3500.0 23.0 9.0 13.03 78.19
33.41 3800.0 28.0 9.0 14.04 72.3
34.13 3832.0 32.0 9.0 13.58 20.83
34.85 3148.0 37.0 34.0 1.33 0.39
35.66 2324.0 40.0 34.0 0.69 0.39
36.39 2168.0 39.0 30.0 0.62 0.39
37.11 1808.0 39.0 30.0 0.51 0.39
37.83 1324.0 39.0 23.0 0.45 0.39
38.63 1276.0 37.0 16.0 0.48 0.39
39.36 1236.0 37.0 16.0 0.47 0.39
40.09 1196.0 37.0 16.0 0.47 0.39
40.8 1140.0 36.0 15.0 0.47 0.39
41.6 1168.0 35.0 16.0 0.46 0.39
42.33 1124.0 34.0 13.0 0.46 0.39
43.05 1080.0 33.0 15.0 0.45 0.39
43.77 1036.0 31.0 13.0 0.45 0.39
44.59 968.0 29.0 11.0 0.45 0.39
45.31 932.0 25.0 11.0 0.45 0.39
46.02 868.0 24.0 10.0 0.46 0.39
46.74 800.0 22.0 9.0 0.45 0.39
47.55 732.0 20.0 10.0 0.44 0.39
48.27 724.0 17.0 11.0 0.46 0.39
48.99 788.0 14.0 9.0 0.54 0.39
49.69 736.0 12.0 10.0 0.47 0.39
50.51 704.0 10.0 11.0 0.45 0.39
51.25 696.0 7.0 10.0 0.45 0.39
51.98 768.0 4.0 13.0 0.51 0.39
52.68 2036.0 2.0 14.0 3.06 30.65
53.52 2376.0 2.0 17.0 4.82 33.4
54.24 2864.0 4.0 14.0 6.9 36.15
54.97 4024.0 9.0 9.0 14.3 70.33
55.67 4984.0 13.0 9.0 18.19 69.55
56.51 6152.0 19.0 14.0 21.17 62.87
57.22 4348.0 26.0 20.0 20.71 57.37
57.95 4620.0 32.0 11.0 15.58 52.26


i dont know if this is anybetter, this is the actually Graph, converted to the Numerical form used to plot the graph by the Logger.

 

[P8ntBalla]

1 pull thru 3rd is plenty.

 

[nhsean69]

Or a couple.... =0)....sorry for the long post....its a Automatic, so i wanted to make sure i got it all so i did a couple. I didnt shut it off right away either, so i just editted the post and deleted everything i didnt need !!

 

[ChicagoGSX]

I can't read these. Just log RPM, Timing, and O2 Bank 1. Edit out everything that isn't through 3rd gear and at WOT.

 

[nhsean69]

You must be logged in to view this image or video.

Data for Picture

RPM Timing O2 Bank 1
748.0 10.0 0.2
724.0 9.0 0.58
724.0 10.0 0.06
1420.0 9.0 0.6
2252.0 17.0 0.36
2468.0 16.0 0.76
3156.0 8.0 0.9
3900.0 8.0 0.02
4728.0 9.0 0.0
5588.0 11.0 0.0
6192.0 16.0 0.0
4308.0 0.0 0.0
4604.0 11.0 0.0
4940.0 10.0 0.0
5224.0 12.0 0.0
4140.0 15.0 0.0
3956.0 10.0 0.0
3580.0 10.0 0.0
3580.0 29.0 0.0
3576.0 34.0 0.0
3428.0 34.0 0.0
3248.0 34.0 0.0
3100.0 34.0 0.0
2952.0 34.0 0.0
2800.0 34.0 0.0
2668.0 34.0 0.0
2544.0 34.0 0.0
2472.0 34.0 0.0
2436.0 33.0 0.0
2400.0 33.0 0.0
2364.0 33.0 0.0
2584.0 32.0 0.02
2556.0 34.0 0.7
2548.0 34.0 0.76
2560.0 34.0 0.66
2552.0 34.0 0.72
2344.0 34.0 0.8
2240.0 32.0 0.0
2196.0 30.0 0.0
2148.0 30.0 0.0