talon187
20+ Year Contributor
- 1,043
- 0
- Feb 11, 2003
-
torrington,
Connecticut
Ok i ended up changing my intake manfiold a month or so back and had issues every since. After i did that i found bad wires in my engine harness. I got another harness and just got it into the car the other day. i started the car up and ran for a min or two and stalled. Went to start it no good. Looked at the wideband it was at 10.0. so i unpluged the fuel pump cranked it a few times fired up for a min. I then checked the plugs back and soaked in fuel. I have no idea why. Im running a stock 1g mas for the moment with an eprom ecu set for my 780s and its program for a maf pro. i asked jeff from dsm chips.com and he said the 1g mas would be ok to run because i didnt want to wire in the maf pro yet. Ive checked for boost leaks and have none. ive also turned down the fuel pressure to like 15psi and it helped at idel but if i give it gas it goes right back to 10.0 im totally stumped. I know im def going to need to change the oil now because im sure theres alot of gas in it now. Im looking for any input or maybe somthing ive over looked thanks!