The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Help With Swap

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.

6boltSpyder

Probationary Member
10
0
Oct 13, 2004
Long Island, New York
Ok I am almost done with my 6 bolt into a spyder swap. But i ran into a problem. When i turn the car off and take the key out the power is still on.. Does anyone have any ideas?? Please let me know im stumped.
 
did you have to splice any wires? that's usually where the problem is
 
as of now no the 2g turbo harness hooked right in with the 2g computer and everything else. The only thing i can think of is that the turbo engine harness is different and that something needs to be rewired, but im not sure what or where to start
 
I am almost done with my motor swap, but I ran into a problem. The engine harnes hooked right up with out a problem and everything went together good. The problem is that the car wont start and the entire car is getting power and ground with out a key. If anyone has any idea please let me know or if someone did a 6 bolt in a spyder swap please let me know thanks everyone Jon
 
I am almost done with my motor swap, but I ran into a problem. The engine harnes hooked right up with out a problem and everything went together good. The problem is that the car wont start and the entire car is getting power and ground with out a key. If anyone has any idea please let me know or if someone did a 6 bolt in a spyder swap please let me know thanks everyone Jon
 
I am almost done with my motor swap, but I ran into a problem. The engine harnes hooked right up with out a problem and everything went together good. The problem is that the car wont start and the entire car is getting power and ground with out a key. If anyone has any idea please let me know or if someone did a 6 bolt in a spyder swap please let me know thanks everyone Jon
 
I am almost done with my motor swap, but I ran into a problem. The engine harnes hooked right up with out a problem and everything went together good. The problem is that the car wont start and the entire car is getting power and ground with out a key. If anyone has any idea please let me know or if someone did a 6 bolt in a spyder swap please let me know thanks everyone Jon
 
Status
Not open for further replies.
Support Vendors who Support the DSM Community

Latest Classifieds

Back
Top