2.3 part #s

[jazzyjay]

I want to start this tread for the purpose of having a place where some one could go to get part numbers for their 2.3 build. Please don't post this brand is better than the other just part #s.



STROKER PISTONS MAKER/PART#/6 or 7 bolt

JE/JE-202194/6
JE/JE-202192/7
MAHLE/86.0mm BORE 9.5:1-Dish/Inverted Dome -23cc- Part Number MIT130385I23/6
MAHLE/85.5mm BORE 9.5:1-Dish/Inverted Dome -23cc- Part Number EVO130366I23/7
CP PISTONS/CB-SC7205/6
CP PISTONS/CB-SC7206/7
WIESCO/WI-K571M86/?
ROSS/99869/6
ROSS/99871/7
Manley/607005-4/6
Manley/608005-4/7



CRANK

89-91 Sonata 2.4
Eagle 100mm
? Mighty Max

 

[Black94DSM]

Eagle 4340 Forged Steel Cranks

6 Bolts;
88mm Part # - 2034655900a6
94mm Part # - 2037005900a6
100mm Part # - 2439375900a6

7 Bolts;
88mm Part # - 2034655900b7
94mm Part # - 2037005900b7
100mm Part # - 2039375900b7

All to be used with the stock 2.0 rod length of 5.900

 

[jazzyjay]

Did anyone figure out if the G64B crank(found in the Mighty Max and Expo), was the same as 6 bolt crank found in the G4CS.

 

[JacksonAuto]

https://www.jacksonautomachine.com/html/shopping/list_section.cfm?sectionId=31

We offer Wiseco and Venolia pistons, Eagle and Oliver rods. They can all be purchased together as a complete assembly or individually.

 

[BoostedTalonTS]

Arias #3420350 (individual p/n) set# 361468 (includes pins, button style locks and ring set)
8.5:1CR .020"/85.5mm over 2.3L (6-bolt)

Features:

Dispalcement: 140.13 -2297cc
Stroke: 3.937 100mm
rod length: 5.906
Comp Height: 1.135 -28.82mm
Pin Dia: .827 -21.01mm
Top Grove: .060 -1.5mm
2nd Groove: .060 -1.5mm
Oil Groove: .158 -4.0mm
piston weight: 306g
piston-to-wall clearance: .0040 -.10mm (if coated, subtract .002")

NOTE: Will NOT work with Scat rods (Scat's small end is too thick to fit inbetween the Arias piston's wrist pin bosses). PM me for specifics.