Any DSM Tuners in the Colorado Springs/Denver area?

lex luthor · 05-15-2008, 12:19 PM

Hi all

I was just wondering if there are any tuners in the Colorado Springs/Denver area. I'm thinking of doing something special under the hood. The looks of my 96 Talon TSI are just fine stock. Don't want to change the looks at all. Thanks.

John

Anne · 05-15-2008, 08:14 PM

Ohhh... there are a bunch of us around. Lots in the greater Denver area, several in the Springs.

mchandla · 05-16-2008, 01:58 PM

There are a few of us out west in boulder

rodent · 05-17-2008, 10:50 AM

I had good luck with Revolutions Tuning in the Springs.

92awddsm · 05-17-2008, 12:23 PM

The founder of DSM Tuners (Ludachris) is from Lone Tree Colorado. Not too far away from you.

lex luthor · 05-17-2008, 01:27 PM

Thanks all

I had my 96 Talon in storage for the last 5 years and I thought I'd get it up and running again. Maybe with a little extra energy under the hood. It's stock now and I still consider it to be one of the most fun cars to drive.

john

Burnett03 · 05-17-2008, 03:51 PM

I'm from aurora

lex luthor · 05-18-2008, 11:34 AM

My Talon has 59,000 miles on it, and I have been told that I should consider getting the timing belt replaced. I got a quote from Midas for $385. $85 for the belt and $300 for labor. The labor seems high, but then, it's been years since I had a garage do work on any of my vehicles. Any thoughts on the quoted price I received? Thanks.

john

rodent · 05-18-2008, 05:23 PM

That price isn't too bad but make sure they replace the balance shaft belt too. There's other guys on the local boards that might do it cheaper.

Don't let it go too long. My timing belt snapped on the highway. Pics are self explanatory:

http://home.comcast.net/~k5shawn/gsx/cyl1-sm.jpg
http://home.comcast.net/~k5shawn/gsx/cyl2-sm.jpg
http://home.comcast.net/~k5shawn/gsx/cyl3-sm.jpg
http://home.comcast.net/~k5shawn/gsx/head1-sm.jpg
http://home.comcast.net/~k5shawn/gsx/head2-sm.jpg
Chunks of metal I found in my turbo:
http://home.comcast.net/~k5shawn/gsx/turbometal-sm.jpg

RoasT BeeF · 05-18-2008, 08:22 PM

$385 isnt bad. Id do it for $200

tdoshi9 · 05-31-2008, 12:18 AM

im in the springs

kiowa125 · 05-31-2008, 02:12 AM

i'm on Fort Carson in the springs, i'll be back towards the middle of the winter, stupid iraq.

RotaryAE86 · 05-31-2008, 07:54 PM

im in the springs right now, but ill be heading back to laramie tomorrow. in early august ill be bringing my talon up here...(the springs)

Hiitman · 06-01-2008, 12:33 PM

Are there any weekly meets in Denver around the Cherry Creek area? I'm moving back to the Springs for a couple months then up to Denver.

rodent · 06-01-2008, 10:45 PM

Not too many DSM meets in the Denver or Cherry Creek area except for the few that happen at Hamburger Stand in Lakewood and another at Sonic I think. Those meets are for anyone and includes all cars. There's also an AWD meet every Sunday night at Clement Park close to Columbine.

lex luthor · 06-02-2008, 02:26 PM

As you put more and more time and money into the vehicles, doesn't the power and torque curves begin moving up into the high RPMs, thereby making the vehicle slow from a dead stop? I.E. you gain performance at the top end at the expense of the low end.

john

Moulin13 · 06-22-2008, 10:50 PM

Hi, im in the Arvada region, im Mecanic, by now my DSMs are on Mexico, but maybe the next month you cant see my Esi in the colorado streets...

fhudsonjr · 06-25-2008, 03:04 PM

Translation, please.

Hiitman · 06-26-2008, 06:03 PM

Quote:

Hamburger Stand in Lakewood and another at Sonic I think

What nights do these meets happen?

vortarian · 07-05-2008, 01:19 PM

Quote:

Originally Posted by lex luthor

My Talon has 59,000 miles on it, and I have been told that I should consider getting the timing belt replaced. I got a quote from Midas for $385. $85 for the belt and $300 for labor. The labor seems high, but then, it's been years since I had a garage do work on any of my vehicles. Any thoughts on the quoted price I received? Thanks.

john

I would stick to a shop that does them regularly, I did the replacement on mine and found out that just replacing the belt isn't what's included in the "DMS Timing Belt Service". You also want to replace the water pump, timing belt tensioner, the main drive pulley. I got lucky when I was picking up a part and a service guy clued me in to it before I got it all put back together. Main reason to do these other parts is because they have the same life span and cost less than the labor to put them all in once you've got the engine open.

evileclipse909 · 07-05-2008, 04:18 PM

I'm in the springs. I do all kinds of work on my budys and I's cars. I'm a certified tech that likes to play around with dsm's. I can do your t-belt real cheap if you suply the parts. I got access to lifts and all kinds of fun stuff. Let me know if you need any help.
Also. Where are all the springs dsmers hangouts?

Jordanbutter · 07-18-2008, 06:12 PM

I'm in the springs and have been wanting to get a dsm meet going. We, my friends and I, have/had a spot behing the abandoned Albertsons and Longs Drugs at Academy and Dublin. I know its a little shady and bit fast and furious but we have spoken with the local businesses and they say there is nothing wrong with us meeting there, and since its secluded theres no harassment from the infamous CSPD. I'm thinking we should meet up next Saturday July 26th, right after my autocross at the World Arena (which you all should come watch in the morning). Anyway let me know if you all want to attend/think its a good idea.

- Jordan Butterfield