The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Bouncy Idle since Head Swap

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

airbrat

20+ Year Contributor
468
0
Sep 4, 2002
Hi guys,

Since doing a headswap my car no longer maintains a decent idle. When I cold start in the morning and as long as there is no load on the engine the idle will stay great. Now when the motor warms up or as soon as I put a load on the engine it will start to bounce. It will bounce from 1400 to 1800rpms. I can't figure it out!

Any ideas? I messed w/ my BISS screw and that only made things worse. :(
 
My two guesses:

Bad or dirty Throttle Position Sensor, you can take it off and clean it and maybe that will help, or it could be bad. Other guess, what kind of cams are you using? Are they stock? If they are aftermarket, they may be the reason for a choppy idle. Hope that helped...
-dale
 
Yes, pretty much everything on the head is stock.

ok, here's an update. My car still has a weird idle but I noticed that when I come to stop if I turn on my A/C then the idle will stop bouncing but it will still idle high (1600rpms).

So for the time being whenever I come to a stop I just turn on my A/C until the light turns green again. Does this sound like an obvious problem to anyone else?
 
I have same problem...my car bounces from say 1000-1400 all the time now after redoing head. Also my a/c well umm...when i turn mine on...my car stalls out LOL, that aight good
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G DSM 4G63 OEM cross member
    FWD 4G63
    • Stizzydrew
    • Updated:
    • Expires
  • For sale 2g OEM 2G DSM cruise control assembly
    Working fine before pulled $40 +shipping/fees (PayPal) PayPal, Zelle, Venmo, Apple pay
    • Stizzydrew
    • Updated:
    • Expires
  • For sale 2g 2G DSM M/T Cluster
    Missing wedge style bulbs in the back, works fine for Speedo and RPM $50 + shipping/fees...
    • Stizzydrew
    • Updated:
    • Expires
  • For sale 2g 2G DSM 4G63 EGR OEM
    K5T58885
    • Stizzydrew
    • Updated:
    • Expires
  • For sale 2g 2G DSM 4G63 Engine mounts
    Timing side transmission mount $25 +shipping/fees (PayPal) Manual transmission mount $25...
    • Stizzydrew
    • Updated:
    • Expires
Back
Top