installed SS mani studs, now stall sometimes

[jsigone]

I installed SS studs for the manifold today. After taking it out and doing some test runs in third everything was fine. Later I gunned it in 1st, then second then had to slow for a red light. The car stalled. It runs strong but stalls evernow and then. My EGT gauge is reading 600*C at idle and about 810-820*C at WOT in third. I checked all my lines and everyting is tight. I'm boosting 15psi.

Does anyone know what I can do to solve this?

 

[rsk_wannabe]

Just a thought... is the ss studs are the only difference....

Is your idle rpm still at 750-800? If not, just set the BISS to increase the idle to fall in that range.

 

[jsigone]

I will give that a try. My idle is at about 600 right now. It was like that b4 I worked on my car and never stalled b4.