Hondasi88
20+ Year Contributor
- 127
- 1
- Mar 14, 2004
-
Silver Spring,
Maryland
First let me say i am finally selling my honda and putting the money into my vr4!
With that said here is the new part list
New Battery "the old one didn't even hold a charge"
New Alternator " I changed batterys and still the volts would go from 15 on down to 9"
New Spark Plugs and wires " its just time"
New Fuel Filter "never change this before"
New Stage 3 clutch
New head "The old head had many bent valves"
New Timming belt " mitshi special"
Datalogger software and palm3c "i dont know how to even use or read this"
I had the head installed with the timming belt and after a few tries the car started right up. GREAT!!!! well after a few days of just leaving it alone now the car wont start. It would crank but not turn over.....I used the logger during the test page and i got code 22 and 23
colant sensor and CA sensor.. I went over to the junk yard and found these parts and now i have no codes but the car is still doing it usual no start business.
Since its time to replace all these parts im gonna see what happens...Also the car was sitting for about 6 months before i decided to get the head replaced and before that it would start when i turned the key half way.
Also my 255 walboro pump wont shut off when the key is in the middle position? Its suppose to feed enough fuel to start the car and then thats it until the car is running right? But this thing just GO ON AND ON.
I know this is long but i really appreciate any help or input
With that said here is the new part list
New Battery "the old one didn't even hold a charge"
New Alternator " I changed batterys and still the volts would go from 15 on down to 9"
New Spark Plugs and wires " its just time"
New Fuel Filter "never change this before"
New Stage 3 clutch
New head "The old head had many bent valves"
New Timming belt " mitshi special"
Datalogger software and palm3c "i dont know how to even use or read this"
I had the head installed with the timming belt and after a few tries the car started right up. GREAT!!!! well after a few days of just leaving it alone now the car wont start. It would crank but not turn over.....I used the logger during the test page and i got code 22 and 23
colant sensor and CA sensor.. I went over to the junk yard and found these parts and now i have no codes but the car is still doing it usual no start business.
Since its time to replace all these parts im gonna see what happens...Also the car was sitting for about 6 months before i decided to get the head replaced and before that it would start when i turned the key half way.
Also my 255 walboro pump wont shut off when the key is in the middle position? Its suppose to feed enough fuel to start the car and then thats it until the car is running right? But this thing just GO ON AND ON.
I know this is long but i really appreciate any help or input
