new turbo

[DarkStarMenace]

I just installed all my mods and after i broke the engine in i decide to get on it with no avail, my new 16g is not boosting. I did find that my bov is leaking at flange but would this cause no boost at all? I have my vacuum line connected from the wastgate to the compressor outlet. I bought one from Extreme PSI, there j-pipe conversion for the 2g eclipse, I have installed a nipple for that purpose. Is not boosting because my pipe diameter is too big, 2.5" all the way to the upper IC pipe. I'm lost.

 

[DarkStarMenace]

just an update for you guys. I hooked up a smoke machine to find any possible leaks and to my dismay I found 3 leaks. 2 of the 3 were very small but the other was a huge leak. the j-pipe conversion comes with a gasket which happens to be offset, mine was installled wrong causing a small leak. Another leak was found in the IC piping before the IC. The huge leak was found also in the IC piping but after the IC. My hose coupling from the the Upper pipe connecting to the custom IC pipe. Just a word to the wise, when tightening up IC piping connections use a 1/4 rachet, not a screwdriver.

Adam