Need Help with Greddy parts

[420a16g]

Ok im not sure if this is the right forum section, so if not then mods feel free to move it to the right one for me. Here is my problem, I bought the Greddy TT, Profec type S, BOV, and Catch Can. Well the Profec S comes with english instructions, the BOV is easy enough to figure out how to install (DUH!!), but the TT and Catch Can the instructions are just straight up Japanese. Well ofcourse i dont know how to read this so i was wondering if anyone knew where to find an English version of these instructions or knows how to install these 2 parts and could write some up. any help will be greatly appreciated.

thanx in advance.

 

[justin0469]

http://www.roadraceengineering.com/instructions/catchcaninstructions.htm

get a hks/greddy/apexi TT harness off ebay or some store and install couldnt be easier. just unplug the stock ignition harness under the steering column and put the TT harness in between. connect it to your TT and you are good to go. im assuming you can find a ground and can tap the ebrake yourself right?

 

[420a16g]

Yea i can ground the e-brake and everything myself, and i actually forgot about the harnesses. As for the link you posted, i dont have a breather catch can, just a regular catch can. The only directions i can find for it are for n/a cars and it shows one tube coming from the pvc and the other going to the intake, im assuming its different for a turbo car but i dont know.

 

[justin0469]

doesnt the catch can just have two nipples on it, one for in and one for out? just put it inline with the vacuum line.

 

[420a16g]

i know how to hook up in the inline hose, but im confused on where to up the outline hose. thats my only problem.