Stizzyflip611
15+ Year Contributor
- 85
- 0
- Nov 21, 2003
-
Howell,
New Jersey
i just recently installed an aeromotive afpr and ss lines. i adjusted the fuel pressure accordingly with the vaccum line disconnected and i started up the car and it idles great. i go and take my car out for a drive and it starts to hit full boost and it feels sooooo weak, like i hit a ####in wall of pillows. do i have a boost leak somewhere, can this possibly be fuel cut?
a little side question. do i need the bracket that is connected to the 2 right side mounting bolts of the throttle body and the cam angle sensor??
thanx alot.
i have a 92 laser awd 5sp. walbro 255, the afpr and ss lines, balance shafts removed, act 2600 w/ street disc, etc.... the rest is in my profile.
thanx again
Andrew
a little side question. do i need the bracket that is connected to the 2 right side mounting bolts of the throttle body and the cam angle sensor??
thanx alot.
i have a 92 laser awd 5sp. walbro 255, the afpr and ss lines, balance shafts removed, act 2600 w/ street disc, etc.... the rest is in my profile.
thanx again
Andrew