The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

BOV leaking under part throttle?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BigAirSkier1580

15+ Year Contributor
92
1
Mar 31, 2004
East Aurora, New York
I've got a stock 1g BOV on my '95 TSi AWD.

Now under part throttle, most commonly if i'm part throttle around 4k rpms, and boosting 5-10psi, my BOV leaks.

Max boost seen on my car is 16psi. But the BOV holds shut under full boost no problems. This problem only occurs are part throttle, most common in 5th gear, around 4k RPMs at 5-10 psi.

What's going on, and how can I fix?
 
Is it a new 1G BOV or a new to you 1G BOV?

Where is it leaking from? The UICP or from the shaft going to the diaphram?
If you not sure, run a intake pressure test and stick your finger in the BOV vent. You'll be able to feel if the air is coming from the bottom or the center of the outlet.

Steve
 
steve said:
Is it a new 1G BOV or a new to you 1G BOV?

Where is it leaking from? The UICP or from the shaft going to the diaphram?
If you not sure, run a intake pressure test and stick your finger in the BOV vent. You'll be able to feel if the iar is coming from the bottom or the center of the outlet.

Steve

Neither, I've had this 1g for a bit, but it has always done this.

It is definately the BOV leaking and only under part throttle. Bacause I can raise to about 12psi, part throttle, and get it to go away.
 
Should I maybe crush a little bit?

But I'm hesitant to do that simply because I thought the stock 1g BOV should be good for up to 18psi. I'm running 16psi.

And I tested some more things with this last night. It will do it virtually in any gear, and ONLY at 4k+ rpms, and low boost. It leaks, and the engine hesitates badly. But if I give some more throttle and boost to about 10plus, it doesn't leak and accerates smoothly and powerfully.
 
Still looking for suggestions. The problem isn't serious, but it is bothersome, and I want to get my car running in top shape by springtime.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 2g ABS - Left side harness brackets
    Looking for the metal brackets for left side ABS wiring harness. Sensors not needed
    • Justin DuBois
    • Updated:
    • Expires
  • For sale 2g 2GB CAS Assembly ( Complete )
    2GB CAS Assembly ( Complete ) $85 + shipping and paypal feesYou must be registered to see element.
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G Clock Spring, Wiper Stalk, Turn Signal Stalk
    2G Clock Spring, Wiper Stalk, Turn Signal Stalk $35 + shipping and paypal fees* removed from...
    • jersygsx
    • Updated:
    • Expires
  • For sale 4G63 2G Cylinder Head
    2G Cylinder Head $250 + shipping and paypal feesYou must be registered to see element.You must...
    • jersygsx
    • Updated:
    • Expires
  • Free 4G63 1G /2G ECU Connector
    Came with a parts car, 1GA Talon with a 2G ECU. Some wires look cut and spliced. I have no use...
    • Badge023
    • Updated:
    • Expires
Back
Top