The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Car won't build boost??!???!?!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BigAirSkier1580

15+ Year Contributor
92
1
Mar 31, 2004
East Aurora, New York
YEAH! The DSM is finally being a DSM.

Here goes. background on the car/motor. 'chassis is a '95 Talon TSi AWD with a '92 JDM 6 bolt motor and cyclone intake manifold. 2g exhaust manifold and T25 turbo. All 2g accessories and intake. Dave Brody (if I recall UICP, stock sidemount, 1g BOV (not crushed).

Now I had all those electical issues, turned out to be the alternator. Replaced that last night, and now the car was running excellent this morning. Perfect voltage, perfect driveability. I cleaned out my TB, and it restored my idle and made my idle as perfect as it has been FOREVER.

Then coming home from work today, I was driving, about 3.5-4k rpms around 10psi boost, and my car shuddered, backfired, and it won't build boost at ALL. The car drives fine if I keep it under 0psi, but the second I near 0psi the car starts shuddering. I had the BOV venting, tried recircing it, and it still did the same thing. I'm not getting anysort of CEL. Air fuel seems to be dumping a little more fuel than normal and runing a little bit richer than normal. And when the car stutters when I near 0psi, I am getting a RICH ratio reading.

WHAT the hell is going on. I'm completely lost. no clue where to look, and getting extremely frustrated.
 
anyone else?

I've never had a problem before, and now all of a sudden it's atrocious. Also, vacuum is same as usual at idle, around 15
 
Check to see if an intercooler pipe popped off. You might have missed it while checking everything over.
 
Quasimondo said:
Check to see if an intercooler pipe popped off. You might have missed it while checking everything over.

That's what it turned out to be. i was rnning All motor on my turbo car. UICP came off at my TB elbow.
 
Well, the pipe was still "there". I think at idle it was forming enough of a seal to run correctly, but then under any load it was leaking.

Either way, I reattached everything, and made sure I tightened it up enough. All is perfect now.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
  • For sale 1g 1GB Eclipse Tail Lights
    1GB Eclipse Tail Lights $80 + shipping and paypal fees* not flawless but in very good shape...
    • jersygsx
    • Updated:
    • Expires
Back
Top