The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Help wisemen, my suspension is fubar

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Zexell

15+ Year Contributor
236
1
Dec 8, 2004
Chicago, Illinois
You must be logged in to view this image or video.

You must be logged in to view this image or video.


As far as I can tell, the upper control arm is the only thing damaged. Judging from the pictures, Is there anything else I should be concerned about?? Thx for your time.
 

Attachments

You must be registered for see attachments list
I just picked up my new upper control arm. I hope I can just replace and be fixed. :thumb:
 
I replaced the upper control arm. And everything looks fine but the ride is still not the same. So I took it in to get an alignment check and I found out that the steering knuckle is too close to the tire.

The mechanic said that the spindle was bent too. I thought the spindle and the steering knuckle was one big piece.... Is the spindle hard to change??? thx.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top