safc problem (fixed) and ghost in my car

[d3ftones]

everytime i turn off the car, then when i start/on it back..the safc setting will reset back to factory setting..means it won't work even i have save the settings(initialize).so now i have to enter all the settings everytime i want to use my car.

could anyone here help to diagnose the problem? is it sth wrong wit my safc memory?

is there a probability it is caused by erroneus on wiring eh?

i've use it for 4 months without problems until 2 days ago.3 weeks ago i juz done swapping oversize,forged piston to my car..so not so sure on the wiring.

any specific wire to check?

 

[LandoAWD]

everytime i turn off the car, then when i start/on it back..the safc setting will reset back to factory setting..means it won't work even i have save the settings(initialize).so now i have to enter all the settings everytime i want to use my car.

could anyone here help to diagnose the problem? is it sth wrong wit my safc memory?

is there a probability it is caused by erroneus on wiring eh?

i've use it for 4 months without problems until 2 days ago.3 weeks ago i juz done swapping oversize,forged piston to my car..so not so sure on the wiring.

any specific wire to check?

Quit hitting "initialize".

 

[PaleDSM]

You do know that hitting "initialize" sets the afc back to its out of the box default setting right?

If you have further problems I'd inspect the wiring. Sounds like the constant 12V source may not be connected correctly.

 

[d3ftones]

You do know that hitting "initialize" sets the afc back to its out of the box default setting right?

If you have further problems I'd inspect the wiring. Sounds like the constant 12V source may not be connected correctly.

damn,there's a website i went......well i was misunderstood the info,doesn't it?.ok im gonna try it,and post here again. tnx dude!

 

[d3ftones]

safc problem = fixed

now a new problem occured,after setting my safc..i take my car for a run..after 2 hours suddenly my car revving from 1000rpm to 1800 rpm without me using the gas pedal/throttle. the safc also shown throttle=0%. it keeps revving like that.

why is this happened eh?

 

[SwiftKidGSX]

safc problem = fixed

now a new problem occured,after setting my safc..i take my car for a run..after 2 hours suddenly my car revving from 1000rpm to 1800 rpm without me using the gas pedal/throttle. the safc also shown throttle=0%. it keeps revving like that.

why is this happened eh?

If you have the patience… solder everything. That’s your best bet. But I had the same problem and fixed it because it was a faulty connection.

Joey 99GSX