Coolant Leak.

[Auladan]

I just finished repairing a 'very' nasty oil leak (on the oil feed line's fitting at the head), and after a few test drives ran in to another problem, probably caused by the oil leak. The small hose indicated in the picture (borrowed picture from the site, hope the owner doesn't mind) developed a crack right at the nipple at the thermostat housing's end, and coolant sprays all over the place from it.

Thing is, I need the car running tomarrow before noon. What can I use to replace this? What size hosing, or...? Any advice appreciated, many thanks.

You must be logged in to view this image or video.

 

[InFlames]

Try JB Weld as a temporary fix.

 

[95TSiNewbie]

If you have a NAPA or any parts store for that matter, Tranny Coolant lines will fit on any coolant feed or return on our cars. The reason to go with the Tranny Lines is because they can take more heat and are a little thicker then stock. TMHO