AGP 2G Front Mount Intercooler Problem?

[b11dragone]

Ok, this question is for anyone with an AGP 2G race front mount interooler. I have the intercooler and all the piping. It is attached to AGP's 50 trim t3/t4 turbo kit, so my problem is this: I bolted the fmic up to tha car and the piping runs perfect to the turbo, however the piping to the throttle body is to short. They give you a throttle body elbow with a bov adapter on it, that bolts right up to the throttle body, and another long pipe to go from the elbow to the intercooler, my problem is that this pipe is not long enough, or the throttle body elbow they sent isn't long enough. Has anybody had this problem that has the kit? It just doesn't make sense why it doesn't reach it needs about 2" or 3" more of piping. And the intercooler can't be pushed any farther. Any help would be appreciated. Thanks Dominick.

 

[Rick4g63]

You can can try a hump coupler like this one:

http://www.roadraceengineering.com/parts/hose/humphose-blue.jpg


Also go to http://www.forcedperformance.com they have couplers for pipes that are a bit "short"

Good luck