Car won't start!

[DavidGST]

Hello guys..

I just rebuilded my engine (4g63) because it had crankwalked but i fixed it and i installed the engine into the car but there's a problem the car won't start..i checked the cilinder compression ant it is ok and i also checked the fuel pomp and it is ok..I checked the cables and sensor and everything it's ok....can you guys help me!!what should i also check?

Thanks

David

 

[fivestardsm]

Did you do a spark test? There is a chance that you might of missed a plug-in when you put the motor back in. I would start there.

Steve.

 

[DavidGST]

Yes...i already did the spark test
Thanks

David

 

[crankbender]

3 things are needed. Fuel, spark, and air.

check this thread for ways to time your spark to your cam gears. Before doing this make sure that the cam gears are not 90% out of phase (pins aiming down when crank is at TDC).

http://www.dsmtuners.com/forums/showthread.php?s=&postid=939440#post939440