The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

95 TSI Awd.Back fire miss very bad when boost starts to build.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

speeddemon198

Probationary Member
7
0
Feb 9, 2011
kennewick, Washington
Ok so this is my vesy first post. I'm going to start with a list of mods. 16g turbo, RC 550's, Aem wideband, Safc 2 ,255 fuel pump, Fmic kit, No name fpr, no name bov not recirculated and a hacked maf.
I'm 95% shure I don't have any boost leaks. I can drive the car just fine if I'm very light on the gas. But as soon as give a little gas the car jerks misses and back fire very vilantly. It seems to idle ok but only when richen the fuel mixture to +8. but when I set the fuel trims to where there suppost to be it idle's very lean. When this is happening my wideband is 11.5 to 12.5 and thats under boost.I have my fuel trims set a -20 accros the rpm range for my 550's.
I've already replaced the plugs and wires and checked the timing.This did just happen all of a sudden. Just wondering if anybody had any ideas or lives close with a logger.Thanks.
 
Last edited by a moderator:
My car recently did the same thing all of a sudden and I thought the plugs were good but a new properly gapped set did the trick for me. From now on I will keep a spare set in my tool box.
 
No I havent done a boost leak test yet but I will today. I'm also going to try and go pick up a set of nkg's.The reason I havent done a boost leak test is because every thing is new but who nows! Sorry I forgot to say but I also installed new lifters, could I have done something ronge. I'll let you guys now how it goes. Thanks
I'm also going to try and get some pic's up today!
 
Ok so i got my plugs put in and did a boost leak test. Well turns out I dah alot of them.Its fixed!!!!!
so does any body about muck horse power it take to make the clutch slip.I'm running on 22 psi right now. I feel like I've built a monster!!!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 1g/2g Auto Welded Center Diff
    1g/2g Auto Welded Center Diff. Message 702-741-6987.
    • Galant665
    • Updated:
  • Wanted WTB MSD DIS 2 bypass plug
    As the title states.You must be registered to see element.
    • ist dwa
    • Updated:
    • Expires
  • Wanted ISO Extreme Psi weighted shift knob
    Easy peazy…
    • James92
    • Updated:
    • Expires
  • For sale 1g 91-94 ignition coil
    1g coil with harness side igniter harness. Digging in a box of remains from a yard six bolt for...
    • Galant665
    • Updated:
    • Expires
  • Wanted 2g Finish My Project!
    I am in need of some big ticket items in order to finish my project. In my engine bay there is...
    • dhssoccer24
    • Updated:
    • Expires
Back
Top