The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Selling my 95 talon

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

What has all been done to that joker? My uncle is looking for a nice 2G that's tuned on pump/93.
 
Might want to correct that ad; the HTA68 actually generates more airflow than a 20G while spooling around the same as an Evo III 16G. It is hands-down better than any 18G.

Also curious where you are coming up with $3000 for a turbo upgrade, and what caused the original turbo to fail if the car truly has 26k on it?
 
the turbo failed because it sat too long and the seals went bad it wasnt original turbo it was a precision .50 trim. and was unable to be rebuilt cause of odd housings i gueess that what precision told me.
also the 3000 is for a tune and dyno along with installing a SAFC into the wiring harness $550
 
the turbo failed because it sat too long and the seals went bad it wasnt original turbo it was a precision .50 trim. and was unable to be rebuilt cause of odd housings i gueess that what precision told me.
They lied. Turbo seals are nothing more than piston rings, and piston rings do not fail from lack of use. I would have been more than happy to rebuild your PTE for under $200, saving you roughly $2800 according to the pricing listed in the ad.
also the 3000 is for a tune and dyno along with installing a SAFC into the wiring harness $550
I'm seeing a $849 HTA68, a brand new AFC Neo is $350 (not sure why you'd go that route with a '95 when your car comes with an EPROM ECU from the factory...ECMLink Lite is the same price), and the AFC gets spliced into your factory harness so there is no addional wiring needed.

So for $1200 spent on parts, your installation and tune must have cost $1800. I wish I had met you sooner; I would be more than happy to take $3000 from you and when I was done the car would be making a lot more than 310whp @ 24psi. ;)

Regardless, the car looks great and you may get your asking price...but I'd advertise it somewhere that would get more national attention instead of Pittsburgh Craigslist. Someone somewhere is looking for a low-mileage 2G and is willing to pay your asking price.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g 2G DSM Link V3
    2G DSM Link V3 $600 + shipping and paypal fees* no cable included * cables are 75 on the...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 2g Shot in the dark (2g Pass strut cut out)
    Need 2g strut tower to save time.
    • frosh29
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale Garage clean out
    Changing setups on the car and getting rid of some stuff as well that's been laying around. Will...
    • 92GSXtacy
    • Updated:
    • Expires
Back
Top