The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Stages of my car

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jrcz24

Probationary Member
9
0
Mar 25, 2009
Kent, Ohio
Alright everyone here are some pics of my '96 Cavalier through its stages from when i purchased it to its current state right now. Comments and Criticism is Welcome!!

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.


This is going to be my new look, Its the 03-05 cavalier bomex front.

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
You sure are one bumper changin fool.LOL I like it without the new bumper though. The new bumper is overkill in my opinion, but I respect your decision to change.
 
It's a pretty nice car. No huge ricey wing...Very nicely done..

Are all of your upgrades strictly cosmetic?

Thanks, and yes my mods are mainly cosmetic except for my air intake. I'm working on a 2.4 LD9 swap and then I'll turbo it. I would really like to put an Ecotec in it but it will cost a lot of money to do the swap.

I got out of some of my Ricey stage, I had to get the stock wing spoiler on it cause I couldn't see and I changed my tails to the Toyota Cavalier tails.
 
Thanks, and yes my mods are mainly cosmetic except for my air intake. I'm working on a 2.4 LD9 swap and then I'll turbo it. I would really like to put an Ecotec in it but it will cost a lot of money to do the swap.

I got out of some of my Ricey stage, I had to get the stock wing spoiler on it cause I couldn't see and I changed my tails to the Toyota Cavalier tails.

I noticed those tails, I thought they were a euro look or something..


You could do a 4g63 swap!!!In a Cavi...If you want good turbo potential, probly a cheap swap too..Or keep it the stock engine and still buy a dsm..
 
I noticed those tails, I thought they were a euro look or something..


You could do a 4g63 swap!!!In a Cavi...If you want good turbo potential, probly a cheap swap too..Or keep it the stock engine and still buy a dsm..


Do you think the swap might work? I believe anything is possible with a welder and a torch, but I've honestly never seen it done before. I'm sure I'll be able to do it considering I am a certified welder.:D

One thing that might cause an issue is the position of the engine. My tranny is on the drivers side and the 4G63's tranny is on the passenger side.
 
Swap in motor and tranny, with new mounts..You should be fine..

I'd have to relocate some stuff like my A/C system and some other stuff.


I think I'd be better off with either 2.4 LD9, Ecotec, 3.8 S/C, 3.4.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top