Suspension differences

[RaceDSM3]

I jus bought a gsx that is missing lower and upper control arms as well as struts and other misc suspension parts. Now what I'm wondering is can I put suspension parts from a n/a on the gsx? I got a rs with a blown motor and was wondering if I can use it for parts for the gsx? In need of knowledge

 

[Paul@RTM]

In the front, most suspension components are the same. In the rear, some are the same but most aren't.

 

[RaceDSM3]

all i really need to swap over is all control arms, spindle and hubs. are those the same?

 

[Paul@RTM]

The bolt pattern where the hubs attach to the knuckles (spindles) are different so you can't use AWD hubs in a FWD knuckle and of course you can't use a FWD hub with an AWD axle 'cause there's no splined bore in the centre to accept the axle.

The upper and lower control arms are the same and so is the trailing arm.

Toe control arms are slightly different.

Sway bar end links are the same.

 

[RaceDSM3]

Awsome thanks