The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Does this ecu look dead/damaged?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1G Eclipse94928

Proven Member
656
7
Apr 3, 2013
Rohnert Park, California
just looking for peoples opinions on if this is why my car wont start/run. I changed my spark plugs, wires, coil pack, and power transistor already so I'm now at the ecu, so i uninstalled it and i can see some corrosion. car will turn over and is getting fuel and would maybe start for a second then stumble and die right away, i was driving, came up to a stop sign, then it just died. i thought i ran it out of gas at first, because it just died after driving normally but i put more gas in and it wasn't that. :/ so i checked the spark and wasnt getting spark in cyl 2 and 3 and still am not after all them parts!! heres some pictures of the ecu. :banghead:

You must be logged in to view this image or video.


You must be logged in to view this image or video.



E: dont want to have to buy a new ecu, if i dont have too, and dsmlink seems like there going on vacation for a week or something and there doing orders(or atleast not as fast.) right now, but i emailed them too.
 

Attachments

You must be registered for see attachments list
Last edited by a moderator:
Still sounds like a transistor to me. If you are sure it was a good transistor, check the wiring for it. It is still a possibility that your ecm is bad. It looks like a burnt spot on the circuit board, but its hard to tell.
 
Your ECU is in definite need of repair as it has quite a bit of damage from electrolyte leaking from the caps. It looks like it has already been fixed once by the pic due to the tantalum capacitor that was added . Wait for ECMTuning to get back with you if you don't want to buy a good ECU , and have it professionally repaired and tested.
 
Acetone will scrub away the corrosion off the momboard, but the caps will definitely have to be replaced.

A repair bill for cap replacement is tons cheaper than a rebuilt ECU ...

Your ECU is in definite need of repair as it has quite a bit of damage from electrolyte leaking from the caps. It looks like it has already been fixed once by the pic due to the tantalum capacitor that was added . Wait for ECMTuning to get back with you if you don't want to buy a good ECU , and have it professionally repaired and tested.

Still sounds like a transistor to me. If you are sure it was a good transistor, check the wiring for it. It is still a possibility that your ecm is bad. It looks like a burnt spot on the circuit board, but its hard to tell.

thank you guys they got back to me, and your all correct. going to ship it to them asap.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top