Bolt #'s on Valve Cover+Timing Belt Cover??

[xXEclipse]

The Valve cover contains 14 bolts containing 7's I BELIEVE.. The timing belt screw(3) I dont know the numbers of, can you guys tell me, what yours read?

When pulling off my valve cover, all Bolts were 7's except one which read 6. After I put it all back, i was left with three screws that I thought were for the Timing belt cover, but there were all different sizes, can you guys shed some light on this?

 

[19Eclipse90]

Those numbers on the heads are not identification numbers. If I remember correctly, they are something to identify either hardness or grade numbers.

The (8) bolts around the outside of the valve cover should have a 25mm long shank.
The (6) bolts around the spark plug well (inside of valve cover) are shorter and should have a 22mm long shank.
The (2) bolts that fasten the timing cover down to the top of the valve cover should have a 16mm long shank.
The (1) bolt for the firewall side of the timing cover should have a 25mm long shank.

 

[speedracer18t]

Thank for this. I was searching everywhere. I bought a VC and it did not have the hardware with it