oil in intake pipe and turbo

I'm in the process of putting a B16G on a @G and when I took off the intake pipe I noticed oil sitting in the pipe and a little sitting on the inlet of the turbo. I assume this is coming from the tube that runs from the valve cover to the intake. Is this a bad thing to have happening? By the way I bought the K&N filter to eliminate this in the future. Any help would be appreciated. Please dont flame or make fun of me for this I know it might be a well known thing for some but not all.

[Defiant]

It's an inevitable thing until you do a blowby filter mod. Gangs of threads, and try this:
http://www.tgilmore.com/talon/catchcan.html
It's the same for 1G and 2G.

[5Glaunch]

Yep don't worry about it.

Thanks guys. I figured it was harmless but I thought I would ask anyway. I bought just the K&N filter to keep it from happening anymore.

Matt

[doug]

Here's an even better solution that's practically free-- just unplug the breather hose from the intake and plug the intake. Just let the hose hang down toward the ground. You could get a longer hose if you want, to make sure it gets all the way past the engine so any oil doesn't blow all over the place.

[Laser-man]

only bad thing about that, is if you go to the track you might get oil everywhere.

[doug]

If you're losing enough oil to noticeably mess up the track, you've got more serious problems to worry about.

[neonorific20]

if you're so concerned about the oil, get a lil catch can and hook it up to the oil line after you disconnect it. make it chrome and get rice points