The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Windshield squirter hose routing [] washer wash tank tube tubing

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

turbobluestreak

Probationary Member
8
0
May 28, 2007
Dayton, Ohio
OK little back story, I bought my 95 AWD and the interior was taken apart, covered with dynamat and missing parts. I finally bought the washer tank and hose off ebay for it and I don't know where it goes. I know the back hatch but with mine being covered in dynamat still and wondering if I'm missing a bracket or something that holds it in. Would anyone be willing to take a picture of it installed in the car? I've checked the photos section and came up with nothing helpful.





tbs
 
One second and I can for you!

:dsm:

Here ya go!


<a href="http://imageshack.us"><img src="http://img228.imageshack.us/img228/2194/1007552ao3.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a>


<a href="http://imageshack.us"><img src="http://img228.imageshack.us/img228/1429/1007553ay8.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a>


<a href="http://imageshack.us"><img src="http://img217.imageshack.us/img217/5067/1007555ge0.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a>

<a href="http://imageshack.us"><img src="http://img228.imageshack.us/img228/7666/1007557mq7.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a>

<a href="http://imageshack.us"><img src="http://img217.imageshack.us/img217/9026/1007558ry3.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a>

:thumb:

:dsm:
 
I believe it connects to the filler tube near the top so air can pass out of the tank while you fill it but overfills won't end up in the bottom of your trunk.
 
Hey gang, can someone help me out with a little "where's it at" mystery I am having. Of course the latest '95 AWD TSi we just picked up is missing squirters in the c/f hood, but everything else down line is gone too. I am trying to figure where the line comes from that feeds the under-hood line. I know the pump is out back, and presume the line runs either inside the car or under the rails, probably along the driver side, but where does it come out under the hood. Is it ported through the fire wall or hidden behind a spot like the brake booster. Any thoughts would be appreciated, and of course, a picture is worth a 1000 words. When it gets to 30 degrees this weekend I want to play under the hood...
Thanks, --Mike
 
The line starts in the back at the pump, travels behind the trunk plastic panels, then the rear seat plastic panels,

You must be logged in to view this image or video.


remove the running board on the passenger side (pull straight up, it's held on by metal clips on the bottom),

You must be logged in to view this image or video.


and you will see a black plastic piece, the line runs underneath it towards the front of the car,

You must be logged in to view this image or video.


where it passes through the firewall on the passenger side at the top,

You must be logged in to view this image or video.


and comes into the engine bay here,

You must be logged in to view this image or video.


You must be logged in to view this image or video.


where it is then split into two hoses by a tee and ran to the squirters.

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Last edited by a moderator:
Perfect, on the firewall under the vehicle info sticker. That is the perfect picture of the battery set up I need too....
Thank you! --Mike
 
can find my fluid tube that run from the rear washer motor in my 95 eclipse can someone tell me where to locate the fluid tube or can show me a diagram to show me how the line is run thru the car from the trunk up to the engine area.thank you
 
It runs on the left side.

Remove the gray scuff plate (driver side), there you find fluid line behinde the cables and the trunk release.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g 2G DSM Link V3
    2G DSM Link V3 $600 + shipping and paypal fees* no cable included * cables are 75 on the...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 2g Shot in the dark (2g Pass strut cut out)
    Need 2g strut tower to save time.
    • frosh29
    • Updated:
    • Expires
  • For sale 2g 2G Mishimoto Radiator & Fan Shroud
    2G Mishimoto Radiator & Fan Shroud $200 + shipping and paypal feesYou must be registered to...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top