Stone'S GSX96
10+ Year Contributor
- 101
- 2
- Jun 4, 2008
-
Decatur,
Illinois
So I posted a thread a while back ago. Asking what could be wrong with my 96 GSX. I think that I have found the problem. I rebuilt my motor while I was at Wyotech, and while I was rebuilding my motor, I installed a Walbro 255. but I broke that lil black clip that helps hold the fuel pump in. So I just put it back together.
After i got the car back together it started but when I go to drive it once I hit about 3 or 4 grand it stops going unless I shift. I can only get up to 40 in 5th. I hooked up a AFPR and I get about 25-30 psi of fuel pressure but I lose it as soon as I shut off the car.
So I think that clip broke helps hold the o-ring in straight. Has anyone had this problem or have any other ideas to fix it? If not I have to buy a hole new sending unit and it cost $200 from thedsmgraveyard.com.
Help Please And Thank you For your time!!

After i got the car back together it started but when I go to drive it once I hit about 3 or 4 grand it stops going unless I shift. I can only get up to 40 in 5th. I hooked up a AFPR and I get about 25-30 psi of fuel pressure but I lose it as soon as I shut off the car.
So I think that clip broke helps hold the o-ring in straight. Has anyone had this problem or have any other ideas to fix it? If not I have to buy a hole new sending unit and it cost $200 from thedsmgraveyard.com.
Help Please And Thank you For your time!!

