Megasquirt install Eclipse GST auto

[EclipseAnders]

The car is a Eclipse GST from 1997. I am wiring my ms at the moment and I was wondering if I have to modify my megasquirt since my transmission is automatic? And then if someone knows, can I use Lancer EVO 3 camshaft position sensor? My harness has seperate wiring for crank angle sensor+camshaft position sensor.

 

[tkelly27]

The 1G CAS fits onto the 2G head and cams.
How to MegaSquirt your 4g63 powered DSM - Eclipse, Talon, Laser

 

[interex]

You will have to use a 1G CAS, the MS has problems with the 2G. And if your car is an automatic then it has its own computer/controller. You should let the ECM handle everything else, while the MS handles the Air/fuel/spark. That will be the best way to go.

 

[ImportWarrior]

The car is a Eclipse GST from 1997. I am wiring my ms at the moment and I was wondering if I have to modify my megasquirt since my transmission is automatic? And then if someone knows, can I use Lancer EVO 3 camshaft position sensor? My harness has seperate wiring for crank angle sensor+camshaft position sensor.

i sent you a pm.

 

[EclipseAnders]

Thanks for the PM Import warrior. And thank you interex and tkelly for your answers. I am going to let my original ECU handle everything else besides AIR/FUEL/SPARK. I will also remove EGR from my engine. Will I get CEL when I just remove these features?

My crank angle sensor looks like this. It is not 2G or 1G. It is from an EVO 3.

You must be logged in to view this image or video.

Maybe this could be a solution?

You must be logged in to view this image or video.

Does anybody have a ECU pinout with wirecolors for 2G? It would be really helpful.

 

[interex]

Maybe this will help you out.

http://www.dsmtuners.com/forums/articles-tuning-ecu/281763-2g-turbo-ecu-pinout-w-wire-colors.html

 

[EclipseAnders]

Does anybody know if I will get CEL for throwing the EGR away?