Oil line to Turbo.. what size flare to tube?

[DSMnOOb00]

Im running an oil line from the oil filter housing to the turbo... But I cant seem to find the right fitting size to the houseing.... I found one that will screw to the oil line... but cant find the right thred for the hole in the housing.

the housing has two holes, one (the bigger one) is blocked off with a hex screw and the 2nd (the smaller one) is open, i found one screw that will screw onto the oil line but not too the housing... any clues?

 

[DSMnOOb00]

Well I order two off of ebay hoping one of them fit

1st 1/4 NPT to -4AN
2nd -4AN to 3/8" NPT

 

[nickclay9395]

go to your local hard ware store and you should find there wall of brass fittings you should have all you need there.

 

[99gst_racer]

-4AN to 3/8" NPT

For future reference, this is the correct one to use on the filter housing.

 

[nek]

For future reference, this is the correct one to use on the filter housing.

Actually after looking around on the site I believe the Ofh has a 3/8th bsp thread. I ordered a plug for the ofh as 3/8bsp so well see how it fits.
OFH Plug