1g drag tire question

[LocknessMonster]

Hey is anyone running a 255/50/16 bfgoodrich g-force ta drag radial on there 1g?.

 

[DRAGIN]

Not personally but I know others who have and they work well. MUch better than the Nitto drags.

 

[daren_p]

Are you looking for a street tire as well or just max traction? If you just want max traction, look up the Hoosier DR's (though wouldn't recommend driving them on the street). 255/50/16 is a pretty tall tire, so I would say unless your making 400 whp minimum, go with a smaller tire. Don't think BF Goodrich has them in a 16 but Hoosier does make a 225/50/16, which is probably better suited. With an awd car, 10's should be a walk in the park for these sized tires.

 

[xlMcMlx DsM]

Im looking into the G-Force DR's, too. Need some effin traction on the highway with my FWD. They seem like a good tire, ill see how they perform next spring.

 

[daren_p]

Im looking into the G-Force DR's, too. Need some effin traction on the highway with my FWD. They seem like a good tire, ill see how they perform next spring.

For a street tire, the BFG's would defently be the way to go

 

[LocknessMonster]

i have a 45 offset on my wheels, i know that i would have to roll the fenders but im concerned about them hitting on the inside.

 

[oVaBoost]

I got BfG's DR's on my 1g fwd and get the job done I kinda heat them up a lil to get better traction. I used to have Nitto drags and were ok but the BFG DR do a better job for my fwd auto dsm.

 

[LocknessMonster]

your running the 255/50/16? and what offset do u have on your wheels.

 

[daren_p]

With a 45 offset, those are more then likely going to hit on the inside. Again, that is a 26.1" tall tire, you better be making some good power, if you want to use those.....

 

[LocknessMonster]

yea i probly will go with something else, thanks for the help guys.