darkhorizon
10+ Year Contributor
- 117
- 1
- Aug 13, 2008
-
flint,
Michigan
I know the fuel pressure regulators we use on our 3800's over here have in some cases handled upwards of 2 255 walbro's, and never had fuel pressure creep issues.
The regulators are brazed onto the rails, but if you guys could get a barb and hook it up VIA injection hose, it would easily control a load of fuel.
I have a ton of spare rails, and these regulators could be hacked off at any local junkyard for nearly free.
The regulator has a boost port on it that regulates boost at a 1:1 ratio, with a base of 50psi. (43 at idle, and 1:1 under boost so about 65 at 15psi of boost)
The regulators are brazed onto the rails, but if you guys could get a barb and hook it up VIA injection hose, it would easily control a load of fuel.
I have a ton of spare rails, and these regulators could be hacked off at any local junkyard for nearly free.
The regulator has a boost port on it that regulates boost at a 1:1 ratio, with a base of 50psi. (43 at idle, and 1:1 under boost so about 65 at 15psi of boost)
