my blinkers arent working???? i need help

[kris_stewart10]

okay as the title states i need help with my blinkers i have checked all of the fuses and bulbs but still no work i need help

what could it be????????????

my hazards work just fine

please help

 

[kris_stewart10]

well could it be that my hazard switch doesnt click down???

 

[viprez586]

Yes. Power runs through the hazard switch. If it is not making contact inside that switch they won't work when the switch is off, but will flash normally when the hazard switch is functioning like it should.
I took my switch apart and found a broken tab and spring. My hazard switch would also jam and finally got stuck. I said screw it and ordered a new hazard switch for $5! from thedsmgraveyard.com So you really can't go wrong, otherwise you can pull the lower kick panel, trace the wiring from the turn signal switch down to the connector and test pins for continuity in different switch positions.

G' Luck

 

[kris_stewart10]

well it clicks down it just doesnt stay down you get what i am saying?????


Well thanks i really appreciate it

 

[greddyturbo19]

man when my blinkers went out and after i checked everything i took it to this place and it was the module in the steering colum that went bad. that piece cost me over 200 dollors its only availble from mitsubishi

 

[kris_stewart10]

i hope that isnt it but i mean i have a few other dsms i can get it off of i have a 90 laser that i can get it off of