2g mas on 1g with 4inch inlet on turbo

[nytescion]

For the guys that are using a 2g mas with a 4 inch inlet turbo what are you using as intake pipe. I currently have a 3inch round pipe on my 1g mas but now i need to upgrade to 2g mas, I'm pretty sure using the round pipe is not going to work though.

 

[bastarddsm]

Somthing tells me your going to need more the a 2gmaf with a turbo that has a 4" inlet....

 

[greddyturbo19]

if you have the money get the GM MAF with the Translator!

 

[anteversion]

i had in the past a 3 inch intake pipe with a 2g mas, you will have to find a silicone coupler that will fit both end of the pipe and end of the mas.

 

[nytescion]

Somthing tells me your going to need more the a 2gmaf with a turbo that has a 4" inlet....

http://www.dsmtuners.com/forums/turbo-system-tech/303969-holset-turbos-part-4-a-2.html

post 53. Also I'm using a 2g until i can track down a 3g. Seeing as 2g's are a dime a dozen...but thanks for commenting on something I didn't ask about.

I'm going to use Dejon tools 3.5 or 4 inch 2g in a 1g pipe.

 

[99gst_racer]

The FP intake pipe would be perfect. 4" inlet, and it ovals out to fit a 2G MAS perfectly.

 

[RoasT BeeF]

The FP intake pipe would be perfect. 4" inlet, and it ovals out to fit a 2G MAS perfectly.

That pipe will not fit a 1g with a MAS before the turbo.

I use a 4" dejon pipe that tapers to fit the 2g mas. Its your only option.

 

[99gst_racer]

That pipe will not fit a 1g with a MAS before the turbo.

Why is that? (just curious)

 

[RoasT BeeF]

There is just not enough room between the turbo and the fenderwell to fit it all in. The FP pipe is a bit to long. It says it right on their website. To bad, because its half the price of the Dejon pipe plus its aluminum over steel.

 

[vaboys2ndgen]

The FP intake pipe would be perfect. 4" inlet, and it ovals out to fit a 2G MAS perfectly.

Mine worked just fine.

There is just not enough room between the turbo and the fenderwell to fit it all in. The FP pipe is a bit to long. It says it right on their website. To bad, because its half the price of the Dejon pipe plus its aluminum over steel.

With 2G mas you could run the APC shorty filter (just do not run the filter without the 2G mas there). OR you'll end up like i did with my FPHTA88 turbo.

But 20psi on the 2G mas on the 4" inlet turbo, FP 4" intake pipe (2 FP 4in couplers), APC filter.

Fit tightly but as a quick fix, its just fine. Just DO NOT USE THE APC FILTER WITHOUT THE 2G MAS there (incase it comes apart like they do).