dennyt4
15+ Year Contributor
- 136
- 2
- Feb 18, 2008
-
Kannapolis,
North Carolina
Well I have been fighting to get this POS dual pump system together for entirely too long now and could really use some help from anyone who has actually installed it.
First of all, I received it with NO INSTRUCTIONS, missing one of the small replacement bolts that goes into the tank to hold the baffle in place, missing one of the NPT barbs, and missing 2 worm clamps...not bad for $420 huh?
Then through NUMEROUS emails back and forth with (Someone at Shit Pump Company * Edit) trying to get instructions sent to me (his first response to me was on 6/26 and I STILL do not have any real instructions as of 7/10 for something that is just a KIT), I managed to get enough short sentences out of him to get this thing physically assembled and the wiring connected to the float assembly from my stock unit. I still do not have any idea on what to do with the wiring that comes out of the top of the unit except for the 12v red wires and ground wires for the pumps - there are still the 3 wires that go somewhere into the wiring harness that I have no idea about (and apparently neither does Someone since he cannot give me any sort of instructions in the MANY email requests I've sent)
If anyone has wired this thing up and can tell me where the 3 wires (yellow, purple, gray) go that come out of the top of the unit, please let me know! Below is a picture of the unit as a reference.
BTW - I am STILL waiting for him to ship me the bolt for in my tank! It was supposedly shipped Priority last week
- this is 7/10 and I still don't have all the pieces from something I received on 6/25...WTF!
First of all, I received it with NO INSTRUCTIONS, missing one of the small replacement bolts that goes into the tank to hold the baffle in place, missing one of the NPT barbs, and missing 2 worm clamps...not bad for $420 huh?
Then through NUMEROUS emails back and forth with (Someone at Shit Pump Company * Edit) trying to get instructions sent to me (his first response to me was on 6/26 and I STILL do not have any real instructions as of 7/10 for something that is just a KIT), I managed to get enough short sentences out of him to get this thing physically assembled and the wiring connected to the float assembly from my stock unit. I still do not have any idea on what to do with the wiring that comes out of the top of the unit except for the 12v red wires and ground wires for the pumps - there are still the 3 wires that go somewhere into the wiring harness that I have no idea about (and apparently neither does Someone since he cannot give me any sort of instructions in the MANY email requests I've sent)
If anyone has wired this thing up and can tell me where the 3 wires (yellow, purple, gray) go that come out of the top of the unit, please let me know! Below is a picture of the unit as a reference.
BTW - I am STILL waiting for him to ship me the bolt for in my tank! It was supposedly shipped Priority last week
- this is 7/10 and I still don't have all the pieces from something I received on 6/25...WTF!
You must be logged in to view this image or video.
