Need help with rc660cc injectors o-rings

[sadc]

ok so today I went to go and replace my injectors o ring's. The two of them. Bottom and top. Its 660cc RC injectors. So anyways. Go down to checker auto parts and ask them if they have the set. Nope they only have the oring for the top, where the injector meets the fuel rail.

Now when I first took out the injector.....it had two(2) o-rings. kinda WOW'd on how that work but it did! So when I got the one from checkers it was only one and it took up 3/4 or a little more on the injector. So Im wondering what kind of o-ring's do I need? This is for a mitsubishi eclipse 1997 GSX... Heres some pics


Heres how it came with

You must be logged in to view this image or video.

Heres what it looked like connected to the fuel rail

You must be logged in to view this image or video.

Heres what I got from checkers

You must be logged in to view this image or video.

And what it looked like with the fuel rail....

You must be logged in to view this image or video.

So i tighted down everything and had fuel EVERYWHERE!....

Oh yea heres what i scored for 4 grand

You must be logged in to view this image or video.

You must be logged in to view this image or video.

so what do you think?

 

[pj91gsx]

the orings are the same for stock. do you only need the seals in the head?

I like the color. Nice front mount.

 

[sadc]

i need all four for the top and i o ring for the bottom injector but minus well get them all

 

[pj91gsx]

I just went to the local autoparts store to get my o-rings on the top of the injectors. they worked perfectly fine. they were cheap too. Much cheaper than getting them anywhere else. The bottom one I could have got at the autoparts store for about 12 dollars for that seal and the other seals for 1 injector. Its really pricey for the bottom seal. I bought mine from JC Whitney for 20 shipped.

 

[fatherbubble]

FIC has the hole set for 25

 

[spinz4]

Get some DSM injectors already!

 

[sadc]

well anyone want to trade?