camshaft identification??????

[chadnum1]

Hey guys! Got a problem with a part identification. Bought out a garage of full of parts from someone being sent over seas. Got a lot of great stuff including a complete 6 bolt head. It has oversized valves, its ported, rebuilt throttle body and 2nd gen elbow. The guy I purchased it from got it from a large part buy out he did a couple years ago and he never even looked at it. Now heres the problem. Ive seen a lot of dsm cams before but not these. They are more aggressive than stock I can tell by the lopes. They are marked with castings not engravings. There is a capital B on the throttle side and a capital F on the cam gear side. Both cams are marked the same. Has anyone seen these before?

 

[SpawnedX]

Pics would be helpful in this situation.

Possibly the stock off an Evo?

 

[divinaand_1]

Might be BC cam shaft's. Pictures is really needed to help identify this.

 

[SpawnedX]

You must be logged in to view this image or video.

These be the BC Cams as mentioned before, close?

 

[chadnum1]

Here are some pics

 

[VTEC_THIS]

They're stock cams.

 

[chadnum1]

Are you sure because I have two sets of first gen cams and a set of second gen cams here and there not marked the same and they dont look loped the same. Maybe theyre from an evo III motor perhaps?

 

[SpawnedX]

They look stock to me.

 

[VTEC_THIS]

I have the same cams sitting in my garage. I assumed they were the stock cams. You could be right, maybe they're from a evo... That would be good news, that would mean mine are worth something .

 

[divinaand_1]

Can you post up some part # on those cams if any?

 

[chadnum1]

Ok thanks everyone. Ill pull it apart tomorrow and see if I can find any part numbers.