1g mas - 2g mas

[hubz91talontsi]

Ok so i plan on switching from the 1g mas to the 2g mas. Is it pretty straight forward..Disconnect 1g..Hook up 2g and plug it in..

 

[->PrOjEcTGS<-]

Yes.

This should help you out.

Now the 2g mas flows about 20% more than the stock unit. You WILL run lean if you don't have a SAFC or something similar to adjust for this difference. 550cc injectors make a good match for this also.

 

[hubz91talontsi]

Hold on, so i can't just plug these right up? Hmm. Maybe i should hold this project off. I already am running lean on these 450s.

 

[dsm-onster]

It may flow more. But the issue is that it meters lower. Which means that the hertz output it generates is 25 or so % less vs. a 1g maf for the same airflow number. So yes you will run lean without an SAFC. Which does a decent job of dialing in a 2g maf. Another option is an eprom ecu and burning the code for the 2g maf. More expensive options include DSMLink or AEM EMS.

Yes please don't bother with a maf upgrade if your running out of injector. Do you have a logger? If not, this should in fact be your first purchase.

 

[hubz91talontsi]

I do but im just not going to mess with this atm. Maybe a little later into summer.

 

[->PrOjEcTGS<-]

It may flow more. But the issue is that it meters lower. Which means that the hertz output it generates is 25 or so % less vs. a 1g maf for the same airflow number. So yes you will run lean without an SAFC. Which does a decent job of dialing in a 2g maf. Another option is an eprom ecu and burning the code for the 2g maf. More expensive options include DSMLink or AEM EMS.

Yes please don't bother with a maf upgrade if your running out of injector. Do you have a logger? If not, this should in fact be your first purchase.

^^ What I meant. Guess I should have explained it a little better.

I'm at about -10 on my SAFC with 650's so if 650's are 30% larger that would mean I'm compensating 20% for the 2g mas.