What sensor is this?

[T Money]

I found this sensor along the fire wall on the drivers side. Dosen't connect to anything, just has a vac line looped around. I am guessing its emissions or something. Can i just unplug it and toss it out?

You must be logged in to view this image or video.

 

[turbosax2]

You can safely toss it - just an emissions solenoid. Since you have DSMLink you can disable the emissions cel's from showing up. If you didn't have link, then unplugging the solenoid would throw a cel.

 

[Gamble97]

If you plan on throwing it out, send it my way.

 

[SanTa_]

You can safely toss it - just an emissions solenoid. Since you have DSMLink you can disable the emissions cel's from showing up. If you didn't have link, then unplugging the solenoid would throw a cel.

He's right. It;s one of the many solenoids for the emissions ;p (not there is that many)

 

[steve]

It was left let that to provide a load to the ECU so it wouldn't trip an error code. The ECU check to make sure that the various solenoids are connected as part of the diagnostic routines.

Until you have DSMLink removing it will throw a CEL.