help with new build palns

[2liter tubo]

ok guy i have a 95gsx with a 96gsx swap in it and now i pretty sure crank walk back again. should i a buy (A) new swap or (B)rebuild.keep in mind im going for an whp of 300hp.my budgets 2g's current mods are n1 cat back and greddy bov thanks ps i know i need alot more mods im thinking of runing this turbo anyone using it. FP Big 28 Turbo
Forced Performance

 

[Badgst96]

Go for the rebuild.. it will be way cheaper.. way way cheaper ha ha are you planning to run 300whp on the t-25??? or are you upgrading because that simple setup can narrow down the outcome :/

 

[DSM_6SL2 Power]

Well first off, make sure it is crank walk. Have someone check the movement for you if you cannot. If it is crankwalk, which I doubt it is, then you can't just rebuild it. That engine is scrapped, and you will need to buy a new one.

 

[2liter tubo]

im pretty sure it crank walk i hope not i will find of sure tommorow is there a better motor to swap in year wise

 

[outkastracing]

you could do a 6bolt swap thats pretty common in the 2gs they dont have crank walk and you can get 300 whp on stock internals! kinda alot of work though but definetly the way to go

 

[2liter tubo]

you could do a 6bolt swap thats pretty common in the 2gs they dont have crank walk and you can get 300 whp on stock internals! kinda alot of work though but definetly the way to go

ya i was thinking about doing that.im looking at motor price now i can get a new motor for $995 good deal and i though i could go 300awhp on my stock internals

 

[MountainDew]

I'd go ahead and do things right the first time and do a 6bolt swap.

 

[2liter tubo]

u guy are right im looking at a 1g

 

[Badgst96]

you could do a 6bolt swap thats pretty common in the 2gs they dont have crank walk and you can get 300 whp on stock internals! kinda alot of work though but definetly the way to go

s
Ya he is right.. that way you dont need to worry about internals... props outkastracing

 

[2liter tubo]

what about the 2.4 bottom end any good

 

[e36bmer]

what about the 2.4 bottom end any good

2.4L stroker? yes they are good.

 

[2liter tubo]

2.4L stroker? yes they are good.

ya i was thinking of run PT Cruiser piston and i have to change the rods

 

[Black95awd]

2.4L stroker? yes they are good.

I think he was talking about the 4G64 (7 bolt) and/or G4CS (6 bolt) not a stroker as you are not changing the stroke of the crank (in relation to the block it came in)