what turbos will fit on an evoIII manifold

[skeeter4200]

what all turbos will fit onto the evoIII mani. Im currently running a big16g on my ported evoIII and am thinking im wanna upgrade to a bigger turbo

 

[Apeximprt2nr]

Any turbo that will bolt to a stock DSM manifold. Search, and you could have found this.
What kind of power are you looking to make? Be specific.

 

[crimsondragon]

Did you want a direct fit or a fit with installation kits? A direct fit would be the Evo III 16g which flows better than the big 16g. Not much of a power gain though.

 

[JusMX141]

I once saw a T66 with a DSM-flanged exhaust housing....

 

[daarkness92]

yeah you can find adapter flanges for a non mitsu turbo

 

[skeeter4200]

im looking to put about 400 to the tires with my current setup @18psi im putting out 283 but i have ordered the dsm link, afpr, 750cc ,and a new boost controller cause mine leaks off at 18psi but im in the delima of what turbo im leaning towards th FP green but still undecided thats why im asking what turbos will fit

 

[spooled_u_1st]

Any mitsu turbo will fit. 18g/20g And some hybrid turbos that are mitsu flanged.

 

[99dsmGST]

Any turbo that has a mitsu flang will work. FP30, 14b, 16g, 18g, 20g etc etc. You get the idea.

 

[skeeter4200]

ok so the FP green will work , so is anyone running this turbo that can tell me if its worth the cash, cause on paper it looks bad ass

 

[JusMX141]

My closest DSM buddy is using an FP Green on his 2G TSi. Upgraded from a TD05H to the Green last fall....we've yet to put any track time on the turbo, but from a driver standpoint it's a hell of a ride. Sitting at 21psi right now on the stock 2G 7-bolt with 135k on it, and it reaches full spool around 4000-4200. The only other engine modification is a set of BC0101 cams.

I highly recommend the FP Green.

 

[skeeter4200]

any other opinion on the Green

 

[prostreetdsmx1]

you have near endless possibilities my friend! Journal, ball bearing, you name it.......