transfer case seals

[more1Gpleez]

does anyone know what the oem or felpro part numbers are for the input and output seals on the transfer case? i have it off ### i pulled the oil pan off to pull the rods/pistons out and im picky bout replacin seals when i work on anything. the motor has been rebuilt recently so the water pump and other seals look good...but i'll take a closer look at them when i clean the block up *block/trans still in car*.

 

[silver bullit]

Call them in the morning when they open, id search vfaq and here.

 

[19Eclipse90]

Output seal/Rear - MD701430, superseded by MR983368 (use this one)
Input seal - I believe is MD723202; the one on the transfer case that the shaft from the transmission goes in.

 

[BurnBarfield]

By looking at CAPS, I believe these are the numbers you need.

MD701430 - output

MD723202 - input


Looks like I got beat to it, gosh I take forever to look up part numbers.

 

[19Eclipse90]

By looking at CAPS, I believe these are the numbers you need.

MD701430 - output

MD723202 - input


Looks like I got beat to it, gosh I take forever to look up part numbers.

No worries, it's good to have confirmation on this sort of thing.

 

[more1Gpleez]

good lookin out guys. so those are the mitsu numbers......got the felpro numbers by chance? i work at autozone and the discount is lovely at times.

 

[twack]

I know its a year old but i thought it might help to let people know that the NAPA part # for the rear transfer case seal AH1895E they had to order it but it was only $15