Key slot for hatch is stubborn

[skyrone]

Everytime i try to open my hatch with my key it is a pain to get to work. I have to wiggle the key around and move it in and out for a good thirty seconds before i can get it to open

 

[absolute_DSM]

Winter will do that. You can replace it - but youll need a 2nd key to open it.

 

[Nicks2319]

The day I got my car I tried to open my hatch with the key, It didn't work, and I have never tried since. I guess this is common.

 

[gekido666_1]

Try using some silicone spray oil they use for guns.. that might help.

 

[Jst4Cyl]

If you try pressing down on the hatch (and holding down while unlocking) and push the key all the way in and slowly pull the key out as you unlock it. You'll find the right spot eventually and it will become easier as you become more familiar with the spot in which it free's up.

Been using this method on my Talon since I got it

 

[skyrone]

thanks for the help i will give these a try. i also need to do the mod to fix my hatch release so i dont have to pull it twice maybe that will mess with something

 

[luv2rallye]

What hatch release mod is this? The power solenoid one (http://www.dsmtuners.com/forums/appearance-interior-exterior/253444-power-hatch-release.html)? I've had to pull mine twice for years and finally just yesterday broke down and bought new hatch struts which fixed it. Everyone wants so much for struts so I put up with it.

 

[skyrone]

What hatch release mod is this? The power solenoid one (http://www.dsmtuners.com/forums/appearance-interior-exterior/253444-power-hatch-release.html)? I've had to pull mine twice for years and finally just yesterday broke down and bought new hatch struts which fixed it. Everyone wants so much for struts so I put up with it.

i dont think it has much to do with the struts but the mod i saw was like you get to the locking mechanism and you drill a hole to stretch a spring more and then you bend another part and then i guess it works like magic

 

[turbosax2]

DSMtalk Forums - View Single Post - Door handles breaking off...

 

[siceclipse]

either pull the cylinder out and spray it down with silicone spray or PB Blaster or just poke the tip of a tooth pick in it and spray lube in it while still installed in the car.

 

[corsair231]

Same problem here. Mine has worked once with the key since I've owned it. I'm planning to get a new key made to see if it helps. Does anyone make a keyed alike lock set for these cars?

 

[luv2rallye]

Well I'm back to pulling the release twice again even after new struts (although they help sometimes - now it's half the time it doesn't open). I'm going to try the mod in the link above - looks promising.

 

[skyrone]

DSMtalk Forums - View Single Post - Door handles breaking off...

Thats exactly the mod that i was talking about nice work

 

[Splitpi]

Mine does it occassionally as well. Try lock graphite... should lubricate the parts better than WD.

Home Repair Guide: How To Fix a Sticky Door Lock - ACME HOW TO.com

 

[housegsx]

Re-key the lock. http://www.dsmtuners.com/forums/articles-exterior-interior/123635-how-clean-rekey-your-door-locks-rear-hatch-lock.html

 

[luv2rallye]

DSMtalk Forums - View Single Post - Door handles breaking off...

Did this fix and it works great. I highly recommend it.

 

[djjohns55]

It might be a long shot but Have you tried getting a new key made sometimes keys get worn