fuel pump check connecter?

[chanley talon]

Can someone take a photo of a fuel pump check connecter. Also how many positive cables and negative battery cables is there? Thanks alot. I know it under the hood but i dont know where.

 

[snowborder714]

Check out this link. It should be a little blue connector.

http://www.dsmtuners.com/forums/new...-drive-connector-check-terminal-location.html

As far as cables connected to the battery:

Negative terminal (2) - one grounded to body right behind terminal and one grounded to starter bolt
Positive terminal (5) - 4 coming from the fuse box and one from the starter (which is usually attached to the terminal clamp)

 

[chanley talon]

well is this the same as a 1g

 

[snowborder714]

Sorry about that. Same area as 2g, but different color:

http://members.shaw.ca/dsm.1000q/Engineprimer/1G/fuelpumptestconn.htm

 

[c16veins]

make sure you get the right jumper connection. there is another one about 6" down the harness that is for a tach signal. if you put 12v to that you'll fry your battery.

 

[chanley talon]

mine didnt have the plug but i found the wire. With the key in the off position i can get the relay to fire with it in the on position i cannot . Is this normal? any way my pump is good but i cannot manual get it to fire? i here the relay but no action?