What's NC port on Greddy Boost controller?

[keslerkaiyu]

I took my boost controller off a while ago while doing the engine. NOw I can't remember what goes in the NC port. Is it just left alone or does it need to be blocked off.

 

[Ajax]

Hey I found this:

 

[keslerkaiyu]

The problem with that is this:

I'm running the COM to the Actuator on my 16g.
The NO is running to my J pipe nipple.
The 4mm hose from the Boost controller is running to the FPR.

I'm not using the NC port. It's only suppose to be use on an External Wastegate, right?

Since I'm not running an External waste gate, what do I do with the NC port?

Can it just be left along, or is it going to leak?

 

[98mitsuGSX-SD]

You are correct the NC port is for EXTERNAL WG only. Just leave the NC port alone. DON'T PLUG THE NC PORT!

Ajax has the correct diagram for an EXTERNAL WG EBC. Although most would prefer the boost source for the wastegate come from the turbo housing.

 

[keslerkaiyu]

Thanks a million